Equipment Name: RF-3826 semi-automatic glass cutting film machine

Equipment composition: RF-3826 single turn single station automatic glass top table (mechanical type) + RF-3826 semi-automatic cutting machine

Equipment performance:

(1), RF-3826 single turn single station on the stage

Technical Parameters:

1), the size of the upper piece: the lower limit of the upper piece size: 2000*1000mm,Upper plate size upper limit: 3800*2600mm

2), the thickness of the top sheet: 3~19mm

3), the film cycle rate: 25-50 seconds

4), the upper limit of the suction depth: 700mm

5), the upper limit of the upper film: 900KG

6), the number of arms on one side: 3 arms

7), single arm suction cup number: 4

8), the upper flip arm: single turn

9), the film station: single station

10), power / power

Install the power supply: 380V/50HZ (special conditions can be adjusted according to customer requirements)

12), installation power: 4KW

13), compressed air: 0.3Mpa

14), vacuum pressure: -50~70Kpa (according to the thickness of the glass)

(B), RF-3826 semi-automatic glass cutting machine

Basic performance:

1. Equipment specifications:

★Maximable size of cut glass: 3700*2500mm

★Workbench height: 900±50mm.

★ Cutting thickness: 3~19mm

2. Cutting parameters:

★Linear parallelism: ≤0.20mm/m

★ Diagonal accuracy: ≤0.20mm/m (above the accuracy of the cutting line before the cutting line)

★Installation power requirements: 380V/50HZ

★ Actual power of the equipment: 8KW.

★ Compressed air: 0.6PA.

Features: small footprint, simple and safe operation, high speed and high precision, labor saving, high cost performance, simple operation and no requirement for operators. Multi-knife cutting efficiency is high. Large pieces of glass are completely cut in a single pass

Application: glass cutting operation for building glass, cabinet glass, etc.