Equipment Specifications:

★Maximable size of cuttable glass: 2500*2000mm

★Workbench height: 900±50mm.

★ Equipment weight: 1.8T.

★ Cutting thickness: 2~19mm

Cutting parameters:

★L(fēng)inear parallelism: 0.25mm/m

★ Diagonal accuracy: 0.30mm/m (the above accuracy is based on the accuracy of the front cutting line)

★ Cutting bridge speed: 0~160m/min. (Adjustable)

★ Cutting bridge acceleration ≥3.0m/s2

★ cutter head speed ≥150m/min

★The accuracy of the cutter head frame is ≥6.0m/s2

★ air floating transmission

★ Cutting head positioning accuracy error ≤ ± 0.15mm

Power / Power:

★Installation power requirements: 380V/50HZ

★ Actual power of the equipment: 8KW.

★ Compressed air: 0.6PA.

Equipment performance

★ Equipment frame: After aging treatment, the table surface is not deformed, and the parallelism is correct.

★Cutting knife holder: The cutter head rotates 360 degrees, and the upper and lower cutting (any straight line and various shaped glass can be cut)

★ Countertop: waterproof panel. It can effectively prevent moisture and not deform.

★ Felt: Foreign industrial felt (fiber and wool) has good flatness and anti-static.

★ Positioning system: pneumatic mechanical and photoelectric scanning positioning.

★ Oil supply method: pneumatic automatic oil filling. Synchronized with the lower knife,

Mechanical part

★ platen: the foreign Combe version (flatness ≤ ± 0.20mm / m).

★ rack / rail: Japan KHK

★Cutter wheel/wheel clamp: German Bole.

Electrical part

★ Adopt domestic computer host, Microsoft Windows interface.

★ Voltage: 380V/50HZ. The device has a voltage regulator.

★Motor: Yaskawa servo motor (the shape and straight line cutting effect are very good).

★ Guide rail: Taiwan silver

★ rack: KHK

★Proximity switch: Chint

★ Control card: Baolun.

★ The main electrical components: Omron and Chint.

★Pneumatic proportional valve: Japan SMC

★Software: Zhongbao wheel cutting software and optimization software (optional)